Chipset Menu; System Agent (Sa) Configuration - Werock Rocksmart Rsc600 Bedienungsanleitung

Rocksmart RSC600 User Manual
When Wake-up System With Fixed Time set as [Disabled], the following items shall appear:
Wake-up System with Dynamic Time
Use this item to enable or disable System wake on alarm event.
System will wake on the current time + Increase minute(s).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following items shall appear:
Wake-up Time Increase
Use this item to select 1-60 minute(s).
USB Power Gating S4-S5
Use this item to USB Wake-up is affected by ERP function in S4 The optional settings:
[Disabled]; [Enabled].
*Note: This function is supported when 'ERP Support' is set as [Disabled]. PCIe Wake-up from S3-S5
The optional settings: [Disabled]; [Enabled].
PTT Configuration
Press [Enter] to make settings for the following sub-items:
TPM Device Selection
Use this item to selects TPM device.
The optional settings: [dTPM]; [PTT].
[PTT]: Enables PTT in SkuMgr;
[dTPM]: Disable PTT in SkuMgr.
Warning! PTT/dTPM will be disabled and all data saved on it will be lost.

Chipset Menu

System Agent (SA) Configuration

Press [Enter] to make settings for the following sub-items:
System Agent (SA) Configuration
GTT Size
Use this item to select the GTT Size.
55 / 110