Security Menu - Werock Rocksmart Rsc600 Bedienungsanleitung

The optional settings: [Disabled]; [Enabled].
System State after Power Failure
Use this item to specify what state to go to when power is re-applied after a power failure.
The optional settings: [Always On]; [Always Off]; [Former State].
PinCntrl Driver GPIO Scheme
Use this item to enable/disable PinCntrl Driver GPIO Scheme
The optional settings: [Disabled]; [Enabled].

Security Menu

Security menu allow users to change administrator password and user password settings.
Administrator Password
If there is no password present on system, please press [Enter] to create new administrator password. If
password is present on system, please press [Enter] to verify old password then to clear/change
password. Press again to confirm the new administrator password.
User Password
If there is no password present on system, please press [Enter] to create new administrator password. If
password is present on system, please press [Enter] to verify old password then to clear/change
password. Press again to confirm the new administrator password.
Secure Boot
Press [Enter] to make customized secure settings:
System Mode
Secure Boot
Secure Boot feature is Active if Secure Boot is Enabled, Platform Key(PK) is enrolled and the System is in
User mode. The mode change requires platform reset.
The optional settings: [Disabled]; [Enabled].
Rocksmart RSC600 User Manual
57 / 110