First Start; First-Time Operation; Mounting The Device; Connection To The Mains - Werock Rocksmart Rsc600 Bedienungsanleitung


There are no mounting screws included with your Rocksmart RSC600 Panel PC. These must be
procured separately. The screw thread has the dimension M4.

Read the mounting instructions for the bracket. It is important that the mounting is carried out according
to the bracket's instructions and that the weight limit is taken into account to ensure a safe and stable
mounting. Make sure that the mounting brackets and screws are tight, but not too tight to avoid
damage.

First start

Before using the product for the first time and before using it in everyday life, read the following instructions.
This chapter provides information on the correct installation, connection and use of the product.
Hint: Items not included in the delivery are sold separately.
Hint: Before connecting the product to a power outlet, make sure that the power cord is not pinched or
damaged. Also make sure that the power output is within the voltage range of the product.

First-Time operation

To put the Rocksmart RSC600 into operation, proceed as follows:

1. Mounting the device

2. Connection to the mains

3. Turning on the computer
Mounting the device
Mount the device at the desired position. Observe the mounting instructions.
Connection to the mains
Once the product is mounted, connect the product to a power outlet using the supplied power cord. Make
sure that the cable is firmly plugged into the product.
Turning on the computer
Press the power button of the device to turn on the computer. The green power LED indicates that the
computer has been turned on.
Rocksmart RSC600 User Manual
HINT
Damage of the display
Do not place heavy objects on the computer, this could damage
the display.
81 / 110