Acpi Settings; Super Io Configuration - Werock Rocksmart Rsc600 Bedienungsanleitung

TPM 2.0 Device Found
Security Device Support
Use this item to enable or disable BIOS support for security device. O.S. will not show Security Device.
TCG EFI protocol and INT1A interface will not be available.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Active PCR Banks
Available PCR Banks
SHA-1 PCR Bank
Use this item to enable or disable SHA-1 PCR Bank.
The optional settings: [Disabled]; [Enabled].
SHA256 PCR Bank
Use this item to enable or disable SHA256 PCR Bank.
The optional settings: [Disabled]; [Enabled].
SHA384 PCR Bank
Use this item to enable or disable SHA384 PCR Bank.
The optional settings: [Disabled]; [Enabled].
When PTT configuration > TPM Device Selection set as [PTT] , user can make
Pending operation
Use this item to schedule an Operation for the Security Device.
*Note: Your Computer will reboot during restart in order to change State of Security Device.
The optional settings: [None]; [TPM Clear].

ACPI Settings

Press [Enter] to make settings for the following sub-items:
ACPI Settings
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the SUSPEND button is
pressed.
The optional settings: [Suspend Disabled]; [S3 (Suspend to RAM)].

Super IO Configuration

Press [Enter] to make settings for the following sub-items:
Super IO Configuration
Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port 1 Configuration
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Rocksmart RSC600 User Manual
49 / 110