Werock Rocksmart RSC600 Bedienungsanleitung Seite 104

Rocksmart RSC600 User Manual
PCH-IO Configuration
PCI Express Configuration Peer Memory
Write Enable
Use this item to enable or disable peer memory write. The optional settings:
[Disabled]; [Enabled].
SATA Configuration SATA Controller
Use this item to enable or disable SATA device.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
SATA Mode Selection
This item determines how SATA controller(s) operate.
The optional settings: [AHCI].
SATA Port
SATA Port
The optional settings: [Disabled]; [Enabled].
Hot Plug
Use this item to designates this port as Hot Pluggable The optional settings:
[Disabled]; [Enabled]
M.2
M.2
The optional settings: [Disabled]; [Enabled].
HD-Audio Support
The optional settings: [Disabled]; [Enabled].
SCS eMMC Support
The optional settings: [Disabled]; [Enabled].
System State after Power Failure
Use this item to specify what state to go to when power is re-applied after a power failure.
The optional settings: [Always On]; [Always Off]; [Former State].
PinCntrl Driver GPIO Scheme
Use this item to enable/disable PinCntrl Driver GPIO Scheme
The optional settings: [Disabled]; [Enabled].
104 / 110