Advanced Menu; Cpu Configuration - Werock Rocksmart Rsc600 Bedienungsanleitung

Rocksmart RSC600 User Manual

Advanced Menu

CPU Configuration

Press [Enter] to view current CPU configuration and make settings for the following sub-items:
Boot Performance Mode
Use this item to select the performance state that the BIOS will set starting from reset vector. The optional
settings: [Max Battery]; [Max Non-Turbo Performance]; [Turbo Performance]
Intel(R) SpeedStep(tm)
This item allows more than two frequency ranges to be supported.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Turbo Mode
Use this item to enable or disable processor Turbo Mode (requires EMTTM enabled too). AUTO means
enable.
The optional settings: [Disabled]; [Enabled].
C states
Use this item to enable or disable CPU Power Management. When set as [Enabled], it allows CPU to go to
C states when it's not 100% utilized.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Enhanced C-states
Use this item to enable or disable C1E. When set as [Enable], CPU will switch to minimum speed when all
cores enter C-State.
The optional settings: [Disabled]; [Enabled].
Package C State Limit
Use this item to set maximum package C State limit. When set as [CPU default], it leaves to Factory
default value. When set as [Auto], it initializes to deepest available package C State Limit.
The optional settings: [C0/C1]; [C2]; [C3]; [C6]; [C7]; [C7S]; [C8]; [C9]; [C10]; [CPU Default]; [Auto].
47 / 110