Using The Wlan Function (Wi-Fi); Using The Bluetooth Function - Werock Rocksmart Rsc600 Bedienungsanleitung

Using the WLAN function (Wi-Fi)

Your device may have an optional WLAN feature.
To use the WLAN (Wi-Fi) function to connect to the network, do the following:
Turning the WLAN radio on/off
To turn on the WLAN radio:
4.
Click on the Windows icon
5.
Click on Connect and "Settings", then on "Network & Internet", then on "WLAN"
6.
Slide the WLAN switch to the "On" position
By moving the WLAN switch back to the "Off" position, you can deactivate the WLAN again. If you want to
turn off all the WLAN radio quickly, just turn on the flight mode. Click
Internet" → "Flight Mode"，Move the Flight Mode switch to the "On" position.
Connecting to a wireless network
1.
Make sure the WLAN function is enabled (as described above).
2.
Click the network icon at the bottom right of the taskbar.
3.
In the list of available wireless networks, click a network and then click Connect.
4.
Some networks require a network security key or passphrase. To connect to one of these
networks, ask your network administrator or Internet service provider (ISP) for the security key
or passphrase.
For more information about setting up a wireless network connection, see Windows Online Help.
To check the connection status, observe the wireless network connection status icon in the Windows
notification area. The more bars the icon displays, the better the WLAN connection strength. Now the
WLAN connection is established. Test the connection to the network using an Internet browser such as
Edge.

Using the Bluetooth function

Your device may have an optional Bluetooth feature.
Bluetooth technology enables wireless communication between devices over short distances without the
need for a wired connection. Data can be transmitted through walls, bags, and briefcases as long as two
devices are within range.
Turning Bluetooth radio on and off
To turn on Bluetooth radio:
1.
Click the Windows icon
2.
Slide the Bluetooth switch to the "On" position.
To turn off the Bluetooth radio:
You can turn off the Bluetooth radio the same way you turn it on. Slide the Bluetooth switch to the "Off"
position.
If you want to quickly turn off all wireless connections, simply turn on Airplane Mode.
Connecting to another Bluetooth device
Rocksmart RSC600 User Manual
→ "Settings" → "Devices" → "Bluetooth"，.
89 / 110
→ "Settings" → "Network &