Werock Rocksmart RSC600 Bedienungsanleitung Seite 105

Security Menu
Security menu allow users to change administrator password and user password settings.
Administrator Password
If there is no password present on system, please press [Enter] to create new administrator password. If
password is present on system, please press [Enter] to verify old password then to clear/change
password. Press again to confirm the new administrator password.
User Password
If there is no password present on system, please press [Enter] to create new administrator password. If
password is present on system, please press [Enter] to verify old password then to clear/change
password. Press again to confirm the new administrator password.
Secure Boot
Press [Enter] to make customized secure settings:
System Mode
Secure Boot
Secure Boot feature is Active if Secure Boot is Enabled, Platform Key(PK) is enrolled and the System is in
User mode. The mode change requires platform reset.
The optional settings: [Disabled]; [Enabled].
Secure Boot Mode
Set UEFI Secure Boot Mode to Standard mode or Custom mode. This change is effective after save. After
reset, this mode will return to Standard mode.
In Custom mode, Secure Boot Policy variables can be configured by a physically present user without full
authentication. The optional settings: [Standard]; [Custom].
When set as [Custom], user can make further settings in the following items that show up:
Restore Factory Keys
Use this item to force system to User Mode, to install factory default Secure Boot key databases.
Rocksmart RSC600 User Manual
105 / 110