Werock Rocksmart RSC600 Bedienungsanleitung Seite 50

Use this item to select an optimal setting for Super IO Device.
The optional settings: [Auto]; [IO=3F8h; IRQ=4;]; [IO=2F8h; IRQ=3;]; [IO=3E8h; IRQ=4;]; [IO=2E8h;
IRQ=3;].
Transmission Mode Select
The optional settings: [RS422]; [RS232]; [RS485].
Mode Speed Select
Use this item to select RS232/RS422/RS485 Speed Select.
The optional
[RS232=1Mbps, RS422/RS485=10Mbps].
Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
Serial Port 2 Configuration
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for Super IO Device.
The optional settings: [Auto]; [IO=3F8h; IRQ=4;]; [IO=2F8h; IRQ=3;]; [IO=3E8h; IRQ=4;]; [IO=2E8h;
IRQ=3;];.
Serial Port 3/ Serial Port 4 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for Super IO Device.
The optional settings: [Auto]; [IO=3F8h; IRQ=10;]; [IO=2F8h; IRQ=10;]; [IO=3E8h; IRQ=10;]; [IO=2E8h;
IRQ=10;]; [IO=2F0h; IRQ=10;]; [IO=2E0h; IRQ=10;]; ► Serial Port 5/ Serial Port 6 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for Super IO Device.
The optional settings: [Auto]; [IO=3F8h; IRQ=11;]; [IO=2F8h; IRQ=11;]; [IO=3E8h; IRQ=11;]; [IO=2E8h;
IRQ=11;]; [IO=2F0h; IRQ=11;]; [IO=2E0h; IRQ=11;];
ERP Support
Use this item to select Energy-Related Products function. This item should be set as [Disabled] if you wish
Rocksmart RSC600 User Manual
settings: [RS232/RS422/RS485=250Kbps];
50 / 110