Operation; Switching On And Off; Selecting Speed And Abrasive Belt - Parkside PBS 600 B1 Bedienungsanleitung

Dismantling / removing the dust box
♦ Pull the dust box
Connect the external extraction adapter
(with reducer ):
♦ Push the external extraction adapter
adapter fitting .
If necessary, use the reducer
onto the external extraction adapter
♦ Push the hose from a suitable dust extraction
device (e.g. a workshop vacuum cleaner) onto
the external extraction adapter
reducer if necessary).
Removal:
♦ Pull the vacuum cleaner hose off the reducer.
♦ Pull the external extraction adapter
reducer if necessary) off.

Operation

Switching on and off
During operation, you can choose between instant-
aneous and continuous operation.
Switching to instantaneous operation:
♦ Press the ON/OFF switch
Switching off instantaneous operation:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
and then press the locking button
Switching off continuous operation:
♦ Press the ON/OFF switch
PBS 600 B1
:
off the appliance.
onto the
by pushing it
.
(with the
(with the
.
.
, keep it pressed in
.
and release it.

Selecting speed and abrasive belt

You can use the setting wheel for belt speed
select the speed even if the appliance is running.
The optimum belt speed is dependent on the work-
piece or material to be processed. Determine the
correct speed by carrying out practical tests. The
table below contains recommended values to help
you with your investigations.
Workpiece / sector
Coarse sanding (grain) 60
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain) 60
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain) 60
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain) 60
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain) 150
Fine sanding (grain)
Rotation speed
preselection
to
Softwood
240
high (5–6)
Hardwood
180
high (5–6)
Chipboard
150
high (5–6)
Removing paint/
varnish
––
high (5–6)
Whetting paints
320
low (1–2)
│
GB 17 ■