Yashica CONTAX RTS Gebrauchsanweisung Seite 64
SELF-TIMER
When you wish
to
include yourself in the picture or in case the shutter
has
to
be tripped at a delayed action
,
use the self-timer.
1
Secure focus and advance
the
film
.
2. Set the self-timer by pushing the self-timer lever all the way in the
direction of the
arrow.
3.
To
activate the self-timer, push the self-timer start lever in the
direction of the arrow. The self-timer wi II then
trip the
shutter at a
delayed action of approximately
7
to
10
seconds.
•
When
using the self-timer to trip the
shutter,
slide the rubber
eye-cup mount upward as illustrated to prevent light from entering
through the viewfinder eyepiece.
By
thus sh ielding the viewfinder
eyepiece
,
exposure inaccuracy due
to
light filtering in from the
eyepiece can be prevented
effectively.
•
In case the film wind is
incomplete,
the
self-timer will activate
when the self-timer start lever is pushed in the direction of
the
arrow
but it will not
tripthe
shutter.
In such a case
,
give
the
film advance a
complete wind and reset the self-timer lever.
•
In case you decide not to use the self-timer after setting the lever in
the
direction of
the
arrow, simply return
the
lever
to
its original
position.
•
The
shutter can be released in
the
normal manner by pressing
the
magnetic release
even when the self-timer lever is set at the
charged position
.
61
