Yashica CONTAX RTS Gebrauchsanweisung Seite 24

FILM LOADING (I)
Avoid direct sunlight when loading the film.
1. After sliding up the rubber eye-cup, open the back cover by
pulling out the film rewind knob . As soon as the back cover is
opened , the exposu re counter will reset to'S ' (start position).
2. Place the fi lm casse tte in the film cassette chamber and push the
film rewind knob back to its original position .
• Use a standard 3Smm cassette film of 12, 20 or 36 exposu re
load.
3. Clip the film tip on the take-up spool as illustrated .
• Avo id inserting the film tip farther than is necessary.
21