Yashica CONTAX RTS Gebrauchsanweisung Seite 56

MANUAL OPERATION (I)
On Auto, the shutter speed is set automatically according to the
subject brightness and on the basis of the prese lected lens aperture.
It varies continuously and , therefore, provides precise exposure even
at in-between speed On manual operat ion, however, the shu tterwi ll
not function at in-between speed se;tings.
Switch to manual operation in the following instances:
• When photographing by preselecting a precise shutter speed.
• In flash photography.
• In B (bulb) photography.
1.
Turn the shu tter control dial away from the 'AUTO ' se tting. The
green shutter speed pointer will then move away from the 'A'
setting in the viewf inder.
2. Set the required shutter speed
setting in alignment with the index.
When thus adjusted the greenpoin(erwill overlap the correspond-
ing setting of the shutter speed scale visible in the viewfi nder.
3. Press the LED display pushbutton and check the position of the
LED dot.
53