Technical Specifications - Ht Instruments Ht10 Bedienungsanleitung

6.1. GENERAL INFORMATIONS
1. To guarantee the instrument's performance make sure to use it
or keep it stored under suitable environmental conditions
2. Do not expose it to high temperatures or humidity or direct
sunlight. Please make sure to turn it off after use.
3. If you expect not to use the instrument for a long time remove
batteries to avoid leakage of battery liquid which could damage
its inner components
4. Only authorized persons are allowed to disassemble the
instrument
6.2. BATTERY REPLACEMENT
When the symbol "
Only skilled technicians can open the instrument and
replace batteries. Before removing batteries disconnect
the test leads from any energized circuits to avoid
electrical shock
Fig. 11: Battery replacement
1. Loosen the screw on the bottom part of instrument (see Fig. 1 –
part 10) and remove the battery cover
2. Remove batteries from the battery compartment
3. Insert new batteries of the same type (see § 7.2) respecting the
indicated polarity (see Fig. 11)
4. Restore the battery cover and tighten the screw again
5. Do not throw used batteries into the environment after use. Use
the appropriate battery disposal methods available in your area
6.3. CLEANING
For cleaning the instrument use a soft dry cloth. Never use a wet
cloth, solvents or water, etc

7. TECHNICAL SPECIFICATIONS

36
" is shown on the display replace the battery.
CAUTION
HT10