6. Clean the HEPA filter
or by lightly tapping it.
7. Clean the primary filter
brush
.
[
]
8. Rinse out the dust collector
if necessary. Allow the dust collector to dry
completely.
9. Reinsert the HEPA filter
fit of the HEPA filter.
10. Fold the primary filter
11. Close the top cover
12. Reinsert the dry dust collector
product.
Cleaning and replacing the side brushes
If the side brushes
o
damaged, they must be cleaned or replaced.
Clean the side brushes
o
a soft cloth.
To replace the side brushes
o
out carefully.
Attach the included spare side brushes
o
on the product (see "Attaching the side
brushes").
Cleaning the anti-drop sensors and the
charging contacts
NOTE: If the anti-drop sensors
the function of the product can be impaired.
1. Wipe the anti-drop sensors
charging contacts
product with a dry, soft cloth.
2. Wipe the charging contacts
charging dock
5 ]
[
Cleaning the roller brush
(Fig. J)
1. Gently press the 2 latches
the roller brush cover
2. Remove the roller brush
3. Remove hair and dirt from the roller
brush
.
[
]
4. Reinsert the roller brush
5. Close the roller brush cover
22 GB/IE/NI
with compressed air
[
]
with the cleaning
[
9 ]
with water,
[
]
. Ensure a secure
[
]
downwards.
9 ]
[
.
[
]
into the
[
]
are dirty or
[
]
[
]
by hand with
[
]
[
]
, pull them
[
]
[
]
are dirty,
[
]
and the
[
]
at the bottom of the
[
]
on the
[
7 ]
with a dry, soft cloth.
and remove
[
]
.
[
]
from the product.
[
]
.
[
]
.
[
]
Cleaning the water tank
1. After using the mop function, remove the
water tank
from the product.
[
]
2. Remove the floor cloth
of the water tank
[
3. Open the rubber cover
remaining water.
4. Wipe the water tank
cloth. Allow the water tank to dry.
Cleaning the floor cloth
Do not use fabric softener.
Do not use bleach.
Do not dry in the tumble dryer.
Do not iron.
Do not dry clean.
Do not machine wash.
Wash the floor cloth
o
temperature of 40 °C.
Storage
Switch off the product by setting the on/off
o
to O position (off)
switch
[
]
Clean the product (see "Cleaning and care")
o
and let it dry completely.
Store the product in its original packaging
o
if you do not intend to use the product for a
long period of time.
Always store the product out of the reach of
o
children in a well-ventilated and dry place.
Keep the product away direct sunlight.
o
The ideal storage temperature is between
o
+5 °C and +60 °C.
If you do not intend to use the product for
o
a long period of time, we recommend to
charge the product at least every 4 weeks
(see "Charging the product"). In this
way, you maintain the performance of the
rechargeable battery.
Replacement parts/
Accessories
Customers can obtain compatible
o
replacement parts and accessories via
www.optimex-shop.com.
at the bottom side
[
]
.
]
. Pour out the
[
]
with a dry, soft
[
]
by hand at a water
[
]