Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.2.6. Reassembly
•
Fit the intermediate plate including the suction strainer and clip in the intermediate plate.
•
Lower the control head with bottle back into the cabinet
•
Reattach the emergency overflow and rinsing hose.
•
Install the connection bracket and secure it with the clip
•
Install the brine line
•
Plug the power supply cable and the connection cable for the control head back in and secure the cover with the two screws
9.2.2 Maintenance work, p.
•
Fasten the two screws on the back of the system.
•
Reconnect the armored hose using the clip on the connection bracket.
•
Plug in the mains adapter.
•
Finally, complete the maintenance log
and close the maintenance wizard.
The logs can be viewed at any time under Settings/
Service/Maintenance/Log!
Assembly, commissioning, operation and maintenance NeoSoft 2500 Connect
(see chap. 9.2.2 Maintenance work, p.
27)
Make sure that the lance including the suction
strainer is positioned in the guide of the housing!
(see chap. 9.2.2 Maintenance work, p.
(see chap. 9.2.2 Maintenance work, p.
28).
28).
27).
(see chap.
Werbung
