6.4. Installation of raw water outlet fitting
In conjunction with the SYR NeoSoft 2500 Connect, the outlet fitting for raw water enables a direct water supply, e.g. to the garden, without
the use of softened water or for drawing off large quantities of untreated water.
•
Remove the hose clip from the lower end of the connection flange
Close the bypass and
depressurize the system!
•
Fit the outlet fitting
or raw water to the connection flange from below and refasten the clamp
3
•
A pipe for direct water supply
The bypass (diverter) must be deactivated
to use the outlet fitting for raw water!
The outlet for the raw water branch is
upstream of the water softener.
1
3
5
without treated water can now be connected to the side outlet.
1
and pull the hose downwards 2.
4
5
2
.
4
13