syr NeoSoft 2500 Connect Anleitung Zur Montage, Inbetriebnahme, Bedienung Und Wartung Seite 69

•
Pull out the chlorine cell. Clean the chlorine cell with cold, clear water and a cleaning fleece or replace it if necessary.
9.2.4 Cleaning / replacement seal set
• Use a screwdriver to remove the six screws from the cover of the seal set on the top of the control head.
Screws
•
Remove and replace seal
•
Then remove the holder
Clean the strainer surfaces in particular with cold, clear water.
Assembly, commissioning, operation and maintenance NeoSoft 2500 Connect
, if necessary..
1
.
2
1
Assembly is carried out in reverse order!
Screws
2