Atlas Copco MaxiDisplay 3 Produktanweisungen Seite 8

Operation
Calibrate the touch screen
1. Start the calibration by (depending on set-up):
■
Clicking the TouchUtility icon on the screen.
■
Selecting Start menu - TouchUtility.
■
Selecting Start menu - All Programs - TouchUtility.
2. Select the Device tab.
3. Select the desired calibration scheme, 3 points or 9 points.
4. Touch and hold each flashing target until it turns yellow.
5. Wait until the calibration is processed.
6. Click the Exit button.
NOTICE
■
Do not click the Release comport and Exit button.
Use the on-screen keyboard
Select Start menu - Accessories - Ease of access - On-Screen Keyboard.
8
EN
© Atlas Copco Industrial Technique AB - 9836 7057 00
MaxiDisplay 3