x-sense XS01-WX Bedienungsanleitung Seite 6

9. To maintain a secure and stable Wi Fi connection,
within the router's coverage areaand make sure that there areas few
obstacles between them as possible.
CEILING
50
MINIMUM
NEVER HERE
THIS AREA
N THIS AREA
Bo cml
install the alarm
MINIMOM
MAXIMUM
SIDEWALL
THIS
ANYWHERE
IN THIS AREA
Installation Procedures
Before installation, you will need to test the alarm, making sure it is
functioning properly within the router's range.Then, install the alarm as
follows:
1. Mark holes on the ceiling or wall using the mounting bracket asa
guide.
2. Dril holes at the two marked positions with a dril bit. Insert the anchor
plugs, then attach the mounting bracket using the provided screws.
3. Attach the alarm to the mounting bracket,then turn clockwise to lock
the alarm.
4_ Test the alarm by pressing the Test/SiIence button It shou d flash red
three times with three short beeps,and then flash blue.
2)