x-sense XS01-WX Bedienungsanleitung Seite 10

Note:
When you replace the battery, the LEDindicator on the alarm will flash
red once and blue for a few seconds, indicating the alarm is back online. If
the LEDindicator flashes blue for onger than two minutes, you will need
to re-add the alarm to the system by repeating the steps above.
Troubleshooting
Problem
Descri ion
The device does Dead batteries
not alarm during
or Improper
operation
a test.
Solution
•Check the battery.
•Firm y pressthe
Test/SiIence button.
False alarms are
mproper
triggered when
installation
cooking or
ocation or
taking a shower.
maintenance
The LED indicator Low battery
flashes red once
warning.
every 60 seconds
with one bee
The LED indicator Malfunction
flashes
red every40
seconds with two
beeps.
•Avoid p acing a arms near
cooking appliances,dusty
areas,showers,or any
areas where the
temperature drops be ow
400F (4.40C) or rises above
IOOOF(37.80C). See the
Location and Installation
section.
•Clean the alarm every
three months to avoid
unwanted alarms caused
by dust and dirt. Seethe
Maintenance section.
Replacethe battery
immediate y.
Clean your alarm to see
if it is functioning
properly. If not, replace
the device immediate y.