x-sense XS01-WX Bedienungsanleitung Seite 3

A WARNING
1 Never ignore an alarm. Failureto respond can result in serious injury or
even death.
2 The silence feature is on y for your convenience and will not correct a
problem. Always check your home for any potential hazardsevery time
an alarm sounds.
3.Test this smoke alarm once a week. If the alarm failsto test correctly,
replace it immediate y! f the alarm is not working properly, it will not
alert you to a problem.
Device Setup within the App
Sign Up
To download the app, searchfor X-Sense Home Security in the Apple
App Store or Goog e PlayStore, or simply scan the QRcode be ow. Create
an account using a valid email address. f you already have an account,
make surethe app is updated to the latest version.
Apple App Store
Google PlayStore
Add a Smoke Alarm
Before adding a smoke alarm, make sure you have a stable 2.4 GHz
Wi-Fi network and enable Bluetooth services on your phone.
1.Tap '+" in the right top corner of the app homepage, select "Smoke
Alarms", then select "Wi-FiSmokeAlarms" and tap "Next" to add a
device.
2. Removethe insu ating film to power up the smoke alarm,
3. Enter a name for the smoke alarm. Select the home you created or
create a new home for the smoke alarm, then select the room in
which it is installed, f you create a new home, you wil need to enter a
name and select the country or region in which you live.
4. Press and ho d the Test/SiIence button on the smoke alarm for five
seconds until it flashes blue. Immediate y tap Operation Confirmed
before the light goes off; or else you need to repeat the step to make
the LED indicator flash blue.
Note: Ifyour mobile phone finds two or more
deviceswaiting to connect to the network, you
need to tap to selectthe correspondingdevice
you want to add.