VOLTCRAFT SEM5000 DUAL Energy-Logger Bedienungsanleitung Seite 73

Use the button
value.
When the display is not flashing, briefly press the
to skip to the next setting or briefly press the
exit the setup menu.
9.6 Standby and low standby limits
You can set two different limits for the standby power consump-
tion. For some units, the normal standby power consumption
drops to an even lower value after a certain time.
Proceed to the next step if you have set the electricity tariff
(see chapter 9.5) before setting the standby limits.
Or access the setup mode (see chapter 9.2). Pressing the
button three times takes you to the standby limit setup
menu (see next step).
Briefly press the
flashes at the top of the display.
Use the button
(STANDBY POWER LEVEL) and the low standby limit (LOW
STANDBY POWER LEVEL = symbol
Briefly press the
begins to flash.
or to modify the respective flashing
button; STANDBY POWER LEVEL
or to toggle between the standby limit
button; the power consumption limit
button
button to
).
73