VOLTCRAFT SEM5000 DUAL Energy-Logger Bedienungsanleitung Seite 69

9.3 Enabling and disabling the night mode
As already described in chapter 9.1,
press and hold the
3 seconds until
top left of the display (only in "CUR-
RENT" mode). The display looks like
this
OFF: The night mode is disabled. In the event of inactivity for
a longer period, the display and the LED indicator light always
remain switched on.
ON: The night mode is enabled. You can set the idle time (max.
16 minutes). In the event of inactivity within the set time frame, the
display and the LED ring switch off.
Briefly pressing the
ON or OFF flashes.
Briefly pressing the button
ON and OFF.
OFF flashes: briefly press the
button; you cannot set the
idle time on the OFF interface.
ON flashes: press the
flashes.
Use the button
flashing input position.
Briefly press the
button for
appears at the
button toggles between on and off;
button; the first position of the time
or to modify the number value of the
button to confirm and then select the
or also switches between
69