VOLTCRAFT SEM5000 DUAL Energy-Logger Bedienungsanleitung Seite 72

Briefly press the
flashing.
Press the button
Briefly press the
BACK to the 24-hour or 12-hour interface
Briefly pressing the
tricity tariff).
When the display is not flashing, briefly press the
skip to the next setting or briefly press the
setup menu.
9.5 Setting Electricity Tariff 1 and 2
You can set two different electricity tariffs for the cost calculation
(e.g. for day or night electricity). Make sure you set the same price
for both tariffs and leave the start time at 00:00:00 if you only have
one electricity tariff.
Proceed to the next step if you have set the 12h/24h format
and the time before setting the electricity tariff (see chapter
9.4).
Or access the setup mode, as described in chapter 9.2.
Pressing the
tariff setup menu (see next step).
Pressing the
electricity price input and start time settings in succession for
both electricity tariffs.
You cannot include extra times for switching between day
and night electricity (weekends, public holidays).
72
button; the displayed year will start
or button to set the year.
button; all displays will stop flashing.
button takes you to the next setting (elec-
button twice takes you to the first electricity
button briefly toggles between the currency,
button to
button to exit the