VOLTCRAFT SEM5000 DUAL Energy-Logger Bedienungsanleitung Seite 93

9.17 Firmware Upgrade
The upgrade function only support FAT32 format, please change
the format to FAT32 first if your SD card format is EXFAT.
1. Rename the 'bin.' file to 'update.bin', then drag the 'bin.' file to
the external hard drive of SD card. ('bin.' file will be provided
by Conrad).
Note:
If your SD card is over 32GB, please format it to FAT32
before firmware upgrade.
2. Then insert the SD card back into the device and long press
the button. When the 'updata' flashes on the display, that
means the upgrade was successful. Upon completion of the
upgrade, the device will automatically restart and enter the
main page.
Note:
The name of the 'bin.' file must be 'update.bin', no other
characters. Please don't remove or insert SD card during
the upgrade.
93