Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
The operating manual is part of this product.
It includes important instructions for the safe, proper
and economic operation of the product, for avoiding
danger, for minimising repair costs and downtimes and
for increasing the reliability and extending the service
life of the product. In addition to the safety instructions
in this operating manual, you must also observe the
regulations applicable to the operation of the product in
your country.
Familiarise yourself with all operating and safety in-
structions before using the product. Only operate the
product as described and for the specified areas of ap-
plication. Keep the operating manual in a good place
and hand over all documents when passing the product
on to third parties.
2
Product description (fig. 1 - 8)
1.
Top handle
2.
Switch lock
3.
Additional handle
3a.
Phillips screw
4.
Threaded sleeve (length adjustment)
5.
Telescopic tube
6.
Coil capsule
6a.
Unlocking
6b.
Cover
7.
Pushbutton (additional handle)
8.
Battery mount
9.
On/off switch
10.
Locking (cutting angle)
11.
Spacer roller
12.
Protective cover
12a.
Phillips screw
13.
Spacer bar (flower guard)
14.
Thread cutter
20 | GB
15.
Motor head
16.
Thread coil
17.
Locking button (thread coil)
18.
Thread outlet eyelet
19.
Battery*
20.
Release button (battery)
* = not included in the scope of delivery!
3
Scope of delivery (Fig. 1)
Item Quantity Designation
3.
1 x
11.
1 x
12.
1 x
12a. 1 x
16.
2 x
1 x
1 x
1 x
4
Proper use
The product is only suitable for cutting grass in gardens
and along the edges of flower beds.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.
An element of the intended use is also the observance of
the safety instructions, as well as the assembly instruc-
tions and operating information in the operating manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
The product may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Please note that our products were not designed with the
intention of use for commercial or industrial purposes.
We assume no guarantee if the product is used in com-
mercial or industrial applications, or for equivalent work.
Explanation of the signal words in
the operating manual
DANGER
Signal word to indicate an imminently haz-
ardous situation which, if not avoided, will
result in death or serious injury.
www.scheppach.com
Additional handle (pre-fitted)
Spacer roller
Protective cover
Phillips screw
Thread coil (1 x pre-fitted)
Phillips screwdriver
Cordless strimmer
Operating manual
Werbung
