ACD M2Smart SE Set Kurzübersicht Seite 73

®
Fig. 73: Attaching M2Grip5/M2Grip5 SE to M2Smart SE
The scanner button is now mechanically contacted and can be triggered by the scanner button in the handle.
®
26.1.3 Removing M2Grip5/M2Grip5 SE from the M2Smart SE
To remove the M2Grip5/M2Grip5 SE, slide the side sections of the M2Grip5/M2Grip5 SE off the device.
Then you can guide the M2Grip5/M2Grip5 SE out of the upper retaining strap attachment.
Fig. 74: Removing M2Grip5/M2Grip5 SE Fig. 75: Removing M2Grip5/ M2Grip5 SE
® ®
from M2Smart SE (1/2) from M2Smart SE (2/2)
After the M2Grip5/M2Grip5 SE is removed, the retaining strap can be attached again (see section 18.1.7).
26.2 M2 logistics protective caps
®
M2 logistics protective caps are another accessory for the M2Smart SE. Their purpose is to increase fall
protection. M2 logistics protective caps are designed for the upper and lower blind cap.
Fig. 76: M2 logistics protective caps
® ®
To charge the M2Smart SE in the DS2Smart , the M2 logistics protective caps must be removed.
®
M2Smart SE_Set_Kurzübersicht_Brief Overview_V1.20_de_en 73 / 76