ACD M2Smart SE Set Kurzübersicht Seite 53

The connection is described below:

Insert the DC connector of the power supply in the DC socket for the supply voltage.
®
The DS2Smart Developer box has an additional USB cable on the side for connection to a PC.
18.2.3.3 DS2Battery Charging box
The interfaces of the DS2Battery docking station are described below. These are located on the left side.
Fig. 62: Interfaces of the DSBattery
The connection is described below:

Insert the DC connector of the power supply in the DC socket for the supply voltage.
18.2.4 Status LEDs
®
18.2.4.1 DS2Smart
The status LEDs of the DS2Smart
Fig. 63: Status LEDs of the DS2Smart
Charging cradle for M2Smart
Speed CHARGE LED lit red:
Speed CHARGE LED lit green:
Speed CHARGE LED not lit:
Charging cradle for replacement rechargeable battery
CHARGE LED lit red:
CHARGE LED lit green:
CHARGE LED not lit:
The charging time of a battery of the M2Smart
®
M2Smart SE_Set_Kurzübersicht_Brief Overview_V1.20_de_en
®
docking station will be described below.
®
®
SE
The rechargeable battery in the M2Smart
charged
The rechargeable battery in the M2Smart
No M2Smart
Replacement battery is being charged
Replacement battery is fully charged
There is no replacement battery inserted in the docking
station
®
SE is approx. 4.5 hours at room temperature.
®
SE is inserted in the docking station
®
SE is being
®
SE is charged
53 / 76