ACD M2Smart SE Set Kurzübersicht Seite 62

25.3 Instructions for Cleaning and Care
Clean the module by setting it down on a surface (e.g. table). This way, you can hold it securely and the
module cannot slip out of your hands during the cleaning process.
Do not use any corrosive chemicals, cleaning solutions or strong
cleaning agents for cleaning.
CAUTION
25.3.1 Communication contacts
If there are communication problems, clean the communication contacts with a soft, damp cloth.
25.3.2 Keyboard/Keys
To clean the keyboard/keys, always switch the Mobile Handheld Computer off since the keyboard/keys react
to being touched and therefore the active program can be compromised or destroyed. Do not put a lot of
pressure on the keyboard/keys.
25.4 Miscellaneous
EU directive about the disposal of waste electrical and electronic equipment (WEEE,
Waste Electrical and Electronic Equipment)
All components must be return to ACD Elektronik GmbH
at the end of their service life for recycling.
WEEE: 53473276
25.5 Attaching and removing the modules
The upper plug-in module and the lower plug-in module can be attached and removed as shown in the
following figures.
Fig. 66: Attaching and removing the upper plug-in module
When attaching and removing the modules, please do not reach into the area of the plug-in sliding
mechanism, as there is a risk of injury due to jamming during sliding.
When attaching and removing the modules, please do not reach
into the area of the plug-in sliding mechanism, as there is a risk of
injury due to jamming during sliding.
CAUTION
®
M2Smart SE_Set_Kurzübersicht_Brief Overview_V1.20_de_en
Fig. 67: Attaching and removing the lower plug-in module
62 / 76