Standby - Quick Tools Quick 709D+ Bedienungsanleitung

2.7.3. Enter new password
1. After entering the new password setting, the window shows "---" and
the hundreds' digit blinks.
2. Then adjust the middle knob to change the hundreds' digit, press the
"▲" button to move the digit, and then the tens' digit starts flashing to
be set. When the units' digit is set, press and hold the "▲" and "▼"
button at the same time to confirm. The second setting method of
password is the same as the first setting method of password.
Note: If the number of password entered twice before and after is not the
same, the window shows "ERR", which means the password setting is not
successful, return to parameter setting, and the password remains unchanged.
2.8.

Standby

2.8.1. How into the Sleeping State
1. Put the handle on the handle holder, the system will to the sleeping
state come automatically.
2. During the system from work state to sleeping state, the window will
display "Off". Then when the temperature cooling down to 100℃, the
unit comes into the sleeping state. In the sleeping state, the LCD will
display "Sleep".
2.8.2. Resume
1. When the handle is putting on the handle, it cannot be resumed from
sleeping.
2. Take down the handle from the holder. At the time, the unit will work at
once.
8
USER MANUAL