Installation; Installing The Control Unit; Electrical Connection - Kessel Basic 400V Einbau- Und Betriebsanleitung

4

Installation

4.1

Installing the control unit

Select installation position taking the following into
account:
There is a suitable power supply in the direct vicinity of
the control unit.
The control unit can be fastened safely and sufficiently.
Fit all fastening screws (drilling template included in the
scope of delivery). In doing so, ensure that the distance
between the screw heads and the fastening surface is
approx. 3 to 4 mm.
Hang the control unit on the fastening screws and press
downwards gently.
4.2

Electrical connection

DANGER
Danger through incorrectly dimensioned connection
cables.
The system is intended exclusively for operation
with the connection pipes provided (or equivalent).
In case of doubt, contact the manufacturer/supplier.
016-306 Installation and operating instructions 29 / 120