Intended Use - Kessel Basic 400V Einbau- Und Betriebsanleitung

2.3

Intended use

The control unit represents the control of a lifting station or
a pumping station for wastewater. Probes, float switches or
pressure sensors can be used to detect the level. When the
switching level has been reached, the pump-off function is
activated. When the level has fallen accordingly, pumping off
is ended automatically.
WARNING
The control unit itself is NOT intended for installation
in an EX zone!
All:
modifications or attachments
use of non-genuine spare parts
repairs carried out by companies or persons not autho-
rised by the manufacturer
not explicitly authorised by the manufacturer in writing can
lead to a loss of warranty.
Notes on positioning of outdoor control cabinets
WARNING
Exceeding of the operating temperature can lead to a fault in the control unit.
Take into consideration the place in which the outdoor control cabinet is installed
Evaluate the sunshine at the installation site.
Take into account the ambient conditions on site.
The following table gives an overview of the required measures.
016-306 Installation and operating instructions 25 / 120