Bosch VitaPower Serie Gebrauchsanleitung Seite 36

en Basic operation
6.3 Using pulse function
Requirement: Blender jug and appli-
ance are prepared.
→ "Preparing the blender jug and ap-
pliance", Page 35
Set the rotary switch to
1.
hold it there.
14
→ Fig.
a The ingredients are processed at
maximum speed.
Release the rotary switch.
2.
a The rotary switch jumps to ⁠ .
a Processing stops.
6.4 Using programmes
Requirement: Blender jug and appli-
ance are prepared.
→ "Preparing the blender jug and ap-
pliance", Page 35
Set the rotary switch to ⁠ .
1.
→ Fig. 11
a The control panel lights up and the
appliance is ready for operation.
Press the required programme but-
2.
ton.
→ Fig. 15
a The display shows the duration un-
til the end of processing.
Wait until the appliance stops.
3.
To end operation, set the rotary
4.
switch to ⁠ .
13
→ Fig.
Tip: To pause the program, press the
program button. The timer stops and
the selected program flashes for
60 seconds. To continue processing,
press the program button again.
To stop the program prematurely,
either press the selected program
button for 3 seconds or set the rotary
switch to ⁠ .
36
6.5 Using the pusher
Remove the measuring cup and in-
1.
sert the pusher into the filling
opening.
→ Fig.
and Push the food down.
2.
→ Fig.
6.6 Adding more ingredients
During processing, remove the
1.
measuring cup and add the in-
gredients through the opening in
the lid.
→ Fig.
To add greater quantities of in-
2.
gredients, open the lid during pro-
cessing.
a
a The appliance pauses.
Add the ingredients.
3.
→ Fig.
Close the lid and continue pro-
4.
cessing.
At manual speed setting, the appli-
ance automatically continues pro-
cessing.
To continue processing when us-
ing a program, press the program
button.
6.7 Emptying the blender jug
Requirement: The appliance has
stopped.
Turn the blender jug anticlockwise
1.
and remove it from the main unit.
→ Fig.
To pour out the processed food,
2.
remove the lid.
→ Fig.
16
16
17
flashes on the display.
18
19
20