Data Transfer Properties - Fronius Ri Fb Inside/I Bedienungsanleitung

LED Status (module status)
Status
Flashes green (three
times)
Lights up green
Flashes green slowly
Lights up red
LED Error (network status)
Status
Off
Lights up red
Lights up
Connection/activityLED
Status
Off
Lights up red
Lights up
Data Transfer
Transmission technology
Properties
Ethernet
Medium
When selecting the cable, plug and termination resistances, the Powerlink as-
sembly guideline for the planning and installation of Powerlink systems must
be observed.
Transmission speed
100 Mbit/s, Half-Duplex-Mode
Bus connection
2 x Ethernet Powerlink ports (RJ45)
Application Layer
CANopen
Meaning
NMT_CS_READY_TO_OPERATE
Ready for operation.
Asynchronous and synchronous data.
No PDO data: all process data are invalid. Received da-
ta are ignored.
NMT_CS_OPERATIONAL
Normal operation.
Asynchronous and synchronous data.
PDO data are received and sent.
NMT_CS_STOPPED
Module stopped (for example, for decommissioning)
Asynchronous and synchronous data.
No PDO data: all process data are invalid. Received da-
ta are ignored.
Exception state, serious fault, etc.
Meaning
No error
Exception state, serious fault, etc.
Error
Meaning
No connection
Connection established, no data traffic
Connection established, data traffic present
Englisch (US)
27