Scope Of Delivery; Component Designation - VOLTCRAFT LCR-400 Bedienungsanleitung

4. SCoPE of DELIVERy

• LCR meter
• 4x AA/Mignon battery
• Alligator test leads (1x red / 1x black)
• SMD measuring tweezers
• Calibration plug
• USB cable
• Power supply
• CD
• Operating instructions (see the separate manual for installation instructions)
• Magnetic hanging strap (see special directions)

5. CoMPoNENT DESIgNaTIoN

The illustration can be found on the fold-out page at the beginning of these instructions.
1 Display (LCD)
2 Operating button
3 "FUNC." button Switching button for measuring functions
4 "HOLD" button to "freeze" the displayed value
5 "CAL" button To perform device calibration for precise measured values
"SORTING" button For quick sorting measurements for tolerance determinations
6 "MAX/MIN" button
7 "SETUP" button: To set the reference and tolerance parameters
"ENTER" button: To confirm the input
8 "D/Q/ESR" button: Switching display parameters in L/C measuring operation
"SER/PAR" button: To toggle serial and parallel mode
9 "FREQ" button: To switch the measuring frequency
"2000/20000" button switching resolution
10 "MAX/MIN" button
"ZERO" button
11 5-pin connection socket/terminal contacts for SMD measuring tweezers with shield (Kelvin measuring lines)
12 4-mm sockets for alligator measuring lines
13 USB/mains unit socket (see special directions on the CD)
14 Battery lid
32