Fantic ENDURO PERFORMANCE 2000 Bedienungsanleitung Seite 71

PRELIMINARY CHECKLIST
Part
Disk brake, front and rear
Throttle control
Gear oil
Wheels and tyres
Clutch
Steering
Stand
Engine stop switch
Kick starter
71
Check
•
regular braking (smoothly, without skidding) upon application and release;
•
correct no-load travel and good sliding of front and rear brake lever;
• brake fl uid level in tank, front and rear;
•
for any leaks along the braking circuit (brake fl uid tank, brake hose pipe, brake calliper),
•
front and rear;
• front and rear brake pads for wear.
that twisting of the handle control and acceleration of the engine are soft, continuous and
smooth.
correct level (see relative table under MAINTENANCE).
• tyre pressure (see relative table under MAINTENANCE);
• tyre tread for wear;
• general state of tyres and wheels;
• the tread for foreign matter and remove;
• for any damage.
•
proper operation (without binding, jerking or slipping) upon activation and release;
• correct no-load travel and good sliding of clutch control lever.
• complete, even, smooth rotation;
• no play.
•
complete, even, smooth rotation;
•
no play on fulcrum pin;
•
correct retraction of stand to rest position;
•
that the springs keep the stand in the rest position without play.
correct operation.
correct operation.