Werbung
Verfügbare Sprachen
Verfügbare Sprachen
f) Do not expose batteries to fi re
or elevated temperatures. Fire or
temperatures over 130 °C can cause an
explosion.
g) Follow all instructions for char-
ging and never charge the
battery or the battery-powered
tool outside the temperature
range stated in the operating
instructions. Incorrect charging or
charging outside the permitted tempe-
rature range may destroy the battery
and increase the risk of fi re.
6) SERVICE
a) Only have qualifi ed personnel
repair your power tool and
only use original spare parts.
This ensures the safety of the device is
maintained.
b) Never repair damaged batte-
ries. All battery repairs should be
carried out by the manufacturer or au-
thorised customer service centres only.
Additional safety instructions
for the planer
a) Wait for the blade shaft to come
to a stop before putting the po-
wer tool down. An exposed rotating
blade shaft may snag the surface, cau-
sing loss of control and serious injury.
b) Fasten and secure the work-
piece by means of clamps or
with another method on a sta-
ble base. If you hold the workpiece
only with your hand or against your
own body, it will stay instable and this
can lead to a loss of control.
c) Do not reach into the ejection
chute with your hands. Risk of
injury from the planer blades.
d) Always hold the planer so that
it lays fl at on the workpiece
when working. The planer could
otherwise tilt and cause injury.
e) The planer should only be mo-
ved over the workpiece when it
is turned on. There is a risk of kick-
back if the planer tilts.
f) Only wood may be planed, not
metal.
g) Harmful dust can occur when
working. Wear a respiratory mask
and attach an external dust extraction
system.
h) In the case of danger, switch
off the planer immediately and
remove the battery from the de-
vice.
i)
Check the blade regularly for
damage. Only use sharp, unda-
maged blades.
k) Ensure that the vents are free of soiling.
l)
Remove the battery
- at all times when the user is not in the
vicinity of the machine,
- before the removal of blockages,
- before checking, cleaning or working
on the machine,
- after touching a foreign body in order
to check the machine for damage,
- for an immediate check if the machine
begins to vibrate excessively.
m) Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric shock or
fi re.
GB
IE
25
Werbung
