Parkside Performance PPHA 20-Li A1 Originalbetriebsanleitung Seite 22

GB IE
Button for the charge level in-
dicator on the battery
Symbols on the device
Attention!
Read the operating instructions care-
fully before using the device.
Wear safety goggles.
Wear a respiratory mask.
Wear safety gloves.
Scale, cutting depth adjustment
Direction of travel of planer blade
Tool holder
Electrical devices must not be
disposed of with domestic waste.
General Safety Instructions
for Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Failure to comply with
these and the following instructions
may result in electric shock, fi re
and/or serious injuries.
Save all safety instructions and gui-
delines for the future.
The term "power tool" used in the safe-
ty instructions refers to mains-operated
power tools (with a mains cable) and to
22
battery-operated power tools (without a
mains cable).
1) Occupational Safety
a) Keep your work area tidy and
well lit. Working in areas that are
untidy or without lighting can result in
accidents.
b) Do not work with the power
tool in a potentially explosive
atmosphere where fl ammable
liquids, gases or dust are pre-
sent. Power tools generate sparks
that can ignite dust or vapours.
c) Keep children and other per-
sons away from the area while
the power tool is in use. Distrac-
tions can cause you to lose control of
the power tool .
2) Electrical safety
a) The plug of the power tool must
fi t into the socket. The plug must
not be modifi ed in any way.
Do not use adapter plugs with
power tools that have a protec-
tive earth. Unmodifi ed plugs and
matching sockets reduce the risk of
electric shock.
b) Avoid body contact with eart-
hed surfaces such as pipes,
radiators, cookers and refrige-
rators. There is an increased risk of
electric shock if your body is earthed.
c) Do not expose the power tool
to rain or wet conditions. The
penetration of water into a power tool
increases the risk of electric shock.
d) Never use the power cable to
carry or hang the power tool
or to pull the plug out of the
socket. Keep the power cable