Selecting No-Load Rotation Speed; Switching On/Off; Connecting The Device To The Parkside App - Parkside Performance Pphksa 40-Li A1 Originalbetriebsanleitung

•­
The saw blade must not touch
the workpiece when switched
on!
­ Switch­on­the­device,­see­chapter­
"Switching­on/off"
•­ Saw­forward­with­moderate­pressure­–­
never­backward.
Mitre cuts up to 45°
•­ Place­the­guide­rail­on­the­workpiece­
with the black rubber lip facing down-
wards­and­fix­the­guide­rail­to­the­
workpiece.
•­ Place­the­device­with­the­groove­on­the­
guide­rail­(37).
•­ Set­the­desired­cutting­angle­as­de-
scribed in the chapter "Setting the cut-
ting­angle".
•­ Hold­the­machine­with­both­hands,­one­
hand­on­the­handle­(3)­and­the­second­
on­the­auxiliary­handle­(13).
•­
The saw blade must not touch
the workpiece when switched
on!
­ Switch­on­the­device,­see­chapter­
"Switching­on/off"
•­ Saw­forward­with­moderate­pressure­–­
never­backward.
Selecting no-load
rotation speed
The­preselection­button­(29)­can­be­
used­to­select­one­of­the­6­no-load­
rotation­speed­levels­or­the­ECO­mode­be-
fore­you­start­the­device.

Switching on/off

Switching on:
1.­ Press­the­switch­lock­(1)­on­the­right­or­
left­of­the­handle­(3).
2.­ Operate­the­on/off­switch­(2).
Once­the­machine­has­started­
up, you can release the switch
lock­(1).
Switching off:
1.­ Release­the­on/off­switch­(2).
Connecting the device
to the Parkside app
Only Smart Performance batteries
can be connected to the Parkside
app.­The­device­connects to­the­app­via­
the battery.
1. Insert Smart Performance­batteries
( 33) into­the­device.­you­will­hear­
them click into place.
2.­Press­the­preselection­button­(
­ The­device­is­now­activated­and­the­
Smart­LED­ ­(
3.­Enable­Bluetooth
4.­Open­the­Parkside­app.
5. Select .
­If­you­have­already­connected­
the Smart Performance battery
you­are­using­the­device­with­to­the­
app,­you­will­find­the­device­in­the­list­
of­connected­devices.­
6.­Select­the­device­from­the­list.­
If it is not available, connect the de-
vice to the app as follows:
Add device"­or,­if­you­have­
1. Select "
already­paired­devices/batteries,­the­
at the top right.
2. Follow the instructions in the app. The
app­scans­the­surroundings­for­available­
devices.
3.­Select­the­device­you­wish­to­add.
GB MT
29)
26)­flashes­(briefly).
on your smartphone.
®
39