Cleaning" Menu, Cleaning Mode; 4.3.10 "Live Mode" Menu, Calling The Current Weather Data Trend - HomeMatic HM-WDC7000 Bedienungsanleitung

4.3.9

"CLEANING" menu, cleaning mode

As the display is touched on a regular basis this can make it dirty, so it must be wi-
ped with a dry linen cloth from time to time (a cleaning cloth for spectacles is ideally
suited to this task; do not use any cleaning fl uids as this could damage the display).
To ensure that you do not change any settings on the station when wiping the dis-
play, you can use cleaning mode, which locks all touch fi elds for 20 seconds.
- Select the "CLEANING" menu:
NEXT
- Touch "ENTER" and the following appears:
CLEANING
- Touch "START" and the following appears:
CLEANING
- You can now clean the display. After 20 s the normal display will reappear.

4.3.10 "LIVE MODE" menu, calling the current weather data trend

In this mode, you can touch an additional fi eld to prompt the combination sensor to
send its measured data at 1 second intervals for 10 seconds. So a single touch is all
that is needed to obtain the very latest weather data, enabling you to track the wind
direction and wind velocity trend, for example, for 10 seconds.
As the combination sensor switches to receive data more often when "LIVE MODE"
is active, it consumes more current, which has an adverse effect on battery life.
Therefore, the "LIVE MODE" menu can be used to set a period of time for which
"LIVE MODE" will remain active. During this period the main menu line will also dis-
play the "REQ" touch fi eld, which is used to request the live retrieval of data descri-
bed above.
- Select the "LIVE MODE" menu:
NEXT
- Touch "ENTER" and the following appears:
BEGIN
64
CLEANING
LIVE MODE
ENTER
START
WAIT
ENTER
+16.00-