HomeMatic HM-WDC7000 Bedienungsanleitung Seite 45

of the door when the weather was poor and one wearing more summery clothing
would appear when the weather was good.
The fi gure's behaviour depends on several weather factors, so you can see at a
glance what would be appropriate outdoor clothing at that particular time. Not only
are the current measured values for the outside temperature, humidity, wind and
rain analysed, but weather forecasting also plays a signifi cant role. This means that
"Weather Joe" is displayed in many different ways and wearing a variety of different
clothes, depending on the weather conditions outside your door.
You can fi nd a precise description of the relevant analysis criteria in Subsection 4.4
of this operating manual.
Display of time and date
- Integrated DCF-77-clock with manual adjustment option, daylight saving adjust-
ment can be deactivated
Display of sunrise and sunset times
- Based on the individual location data entered, can be calculated in the latitude
range -60° to +60˚ N
Moon phase indicator
- Displays the current moon phase: new moon, waxing moon, full moon, waning
moon
Display of hours of sunshine (total or current day)
- Minimum and maximum hours per day saved, together with the time and date
when they occurred
- Sun symbol when the sun is shining
Data logger function
- The data logger collects up to 3000 records at adjustable intervals; the records can
then be read out using the "WeatherPro Edition 2007" analysing software via a
USB interface.
- When the data logger memory is almost full, a prompt to read out the data appears
in good time.
Other information
- Really easy "context-sensitive" operation using clear menu structures
- A beep confi rming that an operation has been performed can be activated and
deactivated
- Can either be stood up as a desktop device or mounted on a wall
- ON time for the display light can be programmed
All important weather data is shown on the display at the same time, so
you do not have to do anything to the device in order to ascertain current
weather conditions. Several base units can be operated in parallel, allowing
data from sensors at various different locations to be displayed simultaneously.
The external sensor system of the WDC7000 uses wireless data transmission only.
This means that you can stand or mount the sensors up to 300 m (depending on
local conditions, see the "Range" section) away from the base station.
45