Time Zone" Menu, Setting The Time Zone; Lighting" Menu, Setting The Timings For The Background Light And Controlling The Brightness - HomeMatic HM-WDC7000 Bedienungsanleitung

4.3.5

"TIME ZONE" menu, setting the time zone

The time zone needs to be specifi ed in order to calculate the sunrise and sunset
times. The current time difference from UTC (Coordinated Universal Time) must be
entered.
The following values apply for Germany:
Daylight saving time → +2
Winter time
- Select the "TIME ZONE" menu:
NEXT
- Touch "ENTER" and the following appears:
TIMEZONE
- Touch "+" or "-" to set the longitude.
- Wait for a few seconds. The adjusted sunrise and sunset times will then appear on
the display.
4.3.6 "LIGHTING" menu, setting the timings for the
background light and controlling the brightness
You can use this menu to set the ON time for the background light, which turns on
automatically when the screen is touched and turns off automatically after a certain
(adjustable) length of time. The light can be set to "OFF" (light never comes on), to a
time of between 5 s and 10 m or to continuous (ON). Furthermore, the times during
which the light should be on continuously can be set.
Automatic adjustment to the ambient brightness can also be activated/deactivated
so that the display can be easily read in practically all brightness conditions.
The background light is only functional during mains operation.
- Select the "LIGHTING" menu:
NEXT
- Touch "ENTER" and the following appears:
LIGHTING
- Touch "+" or "-" to set the ON time.
- Touch "LIGHTING" and the following appears:
→ +1
TIMEZONE
LIGHTING
ENTER
+ 01 -
ENTER
+ 10 SEC -
59