Herunterladen Inhalt Inhalt Diese Seite drucken

Position" Menu, Setting The Position - HomeMatic HM-WDC7000 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für HM-WDC7000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4.3.4

"POSITION" menu, setting the position

Position data for the location of the weather station is required in order to calculate
the sunrise and sunset times. Latitudes can be entered in the range –60.0° to +60.0°.
You can determine your position in various ways:
- The Appendix contains a table listing the coordinates of many German cities. You
can use it to select a location nearby and enter the appropriate coordinates.
- If you have access to an in-car or a mobile GPS navigation device, for example,
you can use that to check your position data; this will give you your precise loca-
tion.
- You can also fi nd precise coordinates on the Internet, as there are many sites to do
with navigation.
- Select the "POSITION" menu:
NEXT
- Touch "ENTER" and the following appears:
LATITUDE
- Touch "+" or "-" to set the latitude.
-
Touch "LATITUDE" and the following appears:
LONGITUDE
- Touch "+" or "-" to set the longitude.
- Wait for a few seconds. The adjusted sunrise and sunset times will then appear on
the display.
Please note that the sunrise and sunset times will only be strictly accurate
at the coast or for a location with a completely fl at landscape. In practice,
mountains, forests of very tall trees, etc. can considerably shorten daylight
hours.
The times specifi ed may even be a few minutes out if the location is an ideal one, as
an approximate formula is used in the calculation.
58
POSITION
ENTER
+ 52.4 -
+ 007.8 -

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis