- Touch "+" or "-" to set the switch-on time for "LIVE MODE".
- Touch "BEGIN" and the following appears:
END
- Touch "+" or "-" to set the switch-off time for "LIVE MODE".
- Wait for a few seconds. The device will then return to normal mode and the data
that has just been set will become active.
- The menu line indicates that data is being transmitted to the combination sensor
with the message: "WAIT FOR TRANSMISSION". The weather station cannot be
operated for as long as this message is displayed.
- When "LIVE MODE" is active, the menu also displays the "REQ" touch fi eld for
retrieving data:
MIN MAX
4.4.
Other functions and indicators
Moon phase indicator
The moon phase indicator uses the following symbols:
Full moon
Weather Joe
Weather Joe is an animated fi gure that provides information on several weather
factors at the same time:
Outside temperature (combination sensor only)
- Weather Joe's clothing is based on the outside temperature detected at the combi-
nation sensor.
Rain
- If the forecast function has detected rainy weather, the fi gure carries a closed um-
brella.
- At the onset of rain, the fi gure carries an open umbrella.
Wind velocity
- At wind velocities above 20 km/h (moderate wind), Weather Joe's hair is blown
about. If the temperature is also below 14˚C, the scarf he is wearing is blown by the
wind too.
RESET
Waxing
+23.45-
REQ
New moon
CFG
Waning
65