EN 55014-1:2017/A11:2020
EN IEC 55014-2:2021 • EN 61000-3-2:2014
EN IEC 61000-3-2:2019/A1:2021
EN 61000-3-3:2013/A2:2021
EN 62841-1:2015 Appendix K
EN 301 489-17 V3.2.4:2020
EN 50663:2017 • EN 62133-2:2017
This declaration of conformity is issued under the
sole responsibility of the manufacturer:
Grizzly Tools
GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim,
Germany, 30.12.2023
EN IEC 55014-1:2021
EN 55014-2:1997/A2:2008
EN 61000-3-3:2013
EN 301 489-1 V2.2.3:2019
EN IEC 63000:2018
EN 300 328 V2.2.2:2019
Christian Frank
Documentation
Representative
127