Parkside Performance PAPS 204 A1 Originalbetriebsanleitung Seite 16

GB IE
Upgrading the
firmware can
change the fea-
tures of the app.
Activating/
deactivating
Bluetooth
To activate Bluetooth
press and hold the
button for the charge
level indicator (2) for
5 seconds until only
the central LED is lit up,
this means Bluetooth
enabled and you can
release the button for
the charge level indic-
ator (2).
If you hold the button
for the charge level
16
NI
®
,
®
®
indicator (2) for 10
seconds until the single
yellow LED goes out,
Bluetooth
ated.
The battery appears
with a white back-
ground under
PARKSIDE app (offline).
Features of the app
If you select a battery,
this will take you to the
overview page.
is For more detailed
information on in-
dividual points,
select the
Information on the
working modes:
The battery is
supplied in
"Performance" mode.
is deactiv-
®
in the
.