GOK Caramatic BasicControl Montage- Und Bedienungsanleitung Seite 20

According to EN 1648-1 or EN 1648-2 chapter 6.1 Positive conductor
protection, a fuse (min. 1A to max. 3A) must be fitted at maximum 1m distance from the 12V
leisure vehicle supply so as not to overload the connection cable.
Connect the connection cable
Carry out a functional test in order to check that the wiring is correct!
The first time or repeated times that power is applied, this is indicated by an LED test (all
LEDs flash briefly).
START-UP
Remote display in sleep mode.
The remote display is automatically returned to sleep mode when you press the touch
sensor again or after 60 seconds.
CONTROL PANEL DISPLAY
Manual changeover*: Manually turn the arrow indicating the withdrawal direction
the rotary knob of the changeover regulator to "reserve". Carry out the gas cylinder change
. CHECK FOR LEAKS**:
20 / 24
tot he 12 V power - supply of the leisure vehicle.
Activate remote display:
 Press the touch sensor for 2 seconds,
 the top LED briefly flashes yellow.
A
A
Caramatic BasicControl
B
B
Artikel-Nr. 71 392 50 b
on