GOK Caramatic BasicControl Montage- Und Bedienungsanleitung Seite 18

Installation on the two-cylinder system Caramatic SafeDrive PLUS
Installation on the two-cylinder system Caramatic BasicTwo
18 / 24
Caramatic BasicControl
• Fit the medium pressure hose assembly of
the two-cylinder system Caramatic
BasicTwo with the connection M G 3/8 lh
nut to the T-piece
15Nm.
• Connect the inlet connector of the
changeover regulator
valve in such a way that the signal
transmitter is at the top.
• Only connect by hand, do not use tools!
(Left-hand thread!).
• Tighten the connections firmly.
• CHECK FOR LEAKS at the connections.
, tightening torque
to the gas cylinder
Artikel-Nr. 71 392 50 b