Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IP camera 20-2940A-IP/21-2940A-IP, 20-2941A-IP/21-2941A-IP, 43-2940A, 50-2940A-IP
GB
Commissioning and configuration
commIssIonIng and confIguratIon
2.
2.1. Preparation
▸
Connect the IP camera to a 100 Mbit Ethernet
LAN (as described in items 1.5, 1.6, 1.7)
▸
Power supply via Power over Ethernet (PoE)
2.1.1. Connection via Ethernet
The IP camera is set up as a DHCP client, i.e. it
obtains its IP address from a DHCP server.
Via Axis Camera Management Software, Behnke IP
video software or in the DHCP server, the existing
cameras can be found in the
The camera's factory default IP address is:
192.168.0.90
37
*
network.*1
2.2. Scope of applications
1. Using the IP camera with a PC and the Behnke
IP video software
▸
Please have a look at the separate instruc-
tions on IP video software configuration.
IP video Software and the corresponding
manuals can be found here:
www.behnke-online.de/downloads/software
2. Using the camera in video management systems
▸
Follow the instructions of your existing video
management system to add a camera, e.g. of
the type „AXIS M3086-V" (or the AXIS camera
installed in the Behnke product).
3. SIP video call:
In conjunction with Behnke SIP intercom stations 3.0
(20-0001B-IP/20-0014B-IP/20-0016B-IP) or a Behnke
station 20-0001-BS/ 20-0014-BS/20-0016-BS/
20-0005-BS), the IP camera can make SIP video calls
using the aforementioned basic electronics.
To do this, it is essential to check whether the
telephone systems used and the on-site SIP tele-
phones support this function.
www.behnke-online.de
Werbung
